 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| BUZ76 Semiconductor Data Sheet October 1998 File Number 2264.1 3A, 400V, 1.800 Ohm, N-Channel Power MOSFET Features * 3A, 400V [ /Title This is an N-Channel enhancement mode silicon gate power * rDS(ON) = 1.800 (BUZ76) field effect transistor designed for applications such as * SOA is Power Dissipation Limited /Subject switching regulators, switching converters, motor drivers, * Nanosecond Switching Speeds 3A, relay drivers, and drivers for high power bipolar switching transistors requiring high speed and low gate drive power. 00V, * Linear Transfer Characteristics This type can be operated directly from integrated circuits. .800 * High Input Impedance hm, N- Formerly developmental type TA17404. * Majority Carrier Device hannel * Related Literature ower Ordering Information - TB334 "Guidelines for Soldering Surface Mount PART NUMBER PACKAGE BRAND OSComponents to PC Boards" BUZ76 TO-220AB BUZ76 ET) /Author NOTE: When ordering, use the entire part number. Symbol ) D /Keyords G Harris emiS onducor, Nhannel ower Packaging OSJEDEC TO-220AB ET, SOURCE ODRAIN 20AB) GATE DRAIN (FLANGE) /Creator ) /DOCIN O pdfark /Pageode /UseOutines /DOCIEW dfmark 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-800-4-HARRIS | Copyright (c) Harris Corporation 1998 BUZ76 Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified BUZ76 400 400 3 12 20 40 0.32 -55 to 150 E 55/150/56 300 260 UNITS V V A A V W W/oC oC Drain to Source Breakdown Voltage (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VDS Drain to Gate Voltage (RGS = 20k) (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDGR Continuous Drain Current (TC = 35oC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID Pulsed Drain Current (Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IDM Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VGS Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD Linear Derating Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG DIN Humidity Category - DIN 40040 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IEC Climatic Category - DIN IEC 68-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum Temperature for Soldering Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL Package Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tpkg oC oC CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: 1. TJ = 25oC to 125oC. Electrical Specifications PARAMETER Drain to Source Breakdown Voltage Gate to Threshold Voltage Zero Gate Voltage Drain Current TC = 25oC, Unless Otherwise Specified SYMBOL BVDSS VGS(TH) IDSS TEST CONDITIONS ID = 250A, VGS = 0V VGS = VDS, ID = 1mA (Figure 9) TJ = 25oC, VDS = 400V, VGS = 0V TJ = 125oC, VDS = 400V, VGS = 0V VGS = 20V, VDS = 0V ID = 1.5A, VGS = 10V (Figure 8) VDS = 25V, ID = 3A (Figure 11) VCC = 30V, ID 2.5A, VGS = 10V, RGS = 50, RL = 10. (Figures 14, 15) MIN 400 2.1 2.1 VDS = 25V, VGS = 0V, f = 1MHz (Figure 10) TYP 3 20 100 10 1.65 2.5 15 40 50 30 300 50 35 3.1 75 MAX 4 250 1000 100 1.800 20 60 65 40 500 80 60 UNITS V V A A nA S ns ns ns ns pF pF pF oC/W oC/W Gate to Source Leakage Current Drain to Source On Resistance (Note 2) Forward Transconductance (Note 2) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Thermal Resistance Junction to Case Thermal Resistance Junction to Ambient IGSS rDS(ON) gfs td(ON) tr td(OFF) tf CISS COSS CRSS RJC RJA Source to Drain Diode Specifications PARAMETER Continuous Source to Drain Current Pulsed Source to Drain Current Source to Drain Diode Voltage Reverse Recovery Time Reverse Recovery Charge NOTES: 2. Pulse Test: Pulse width 300s, duty cycle 2%. 3. Repetitive rating: pulse width limited by maximum junction temperature. See Transient Thermal Impedance curve (Figure 3). SYMBOL ISD ISDM VSD trr QRR TJ = 25oC, ISD = 6A, VGS = 0V TJ = 25oC, ISD = 3A, dISD/dt = 100A/s, VR = 100V TC = 25oC TEST CONDITIONS MIN TYP 1.1 300 2.5 MAX 3 12 1.4 UNITS A A V ns C 2 BUZ76 Typical Performance Curves 1.2 POWER DISSIPATION MULTIPLIER 1.0 ID, DRAIN CURRENT (A) 3 0.8 Unless Otherwise Specified 4 VGS 10V 0.6 0.4 2 1 0.2 0 0 25 50 75 100 TC , CASE TEMPERATURE (oC) 125 150 0 0 50 100 TC, CASE TEMPERATURE (oC) 150 FIGURE 1. NORMALIZED POWER DISSIPATION vs CASE TEMPERATURE FIGURE 2. MAXIMUM CONTINUOUS DRAIN CURRENT vs CASE TEMPERATURE ZJC, TRANSIENT THERMAL IMPEDANCE 0.5 1 0.2 0.1 0.05 0.02 0.01 0 PDM 0.1 NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZJC + TC 0.01 10-5 10-4 10-1 10-3 10-2 t, RECTANGULAR PULSE DURATION (s) 100 101 t1 t2 FIGURE 3. MAXIMUM TRANSIENT THERMAL IMPEDANCE 102 TJ = MAX RATED TC = 25oC ID, DRAIN CURRENT (A) 1s 10s 8 PD = 40W VGS = 20V 10V 8V 7.5V 7V 6.5V 6V PULSE DURATION = 80s TJ = 25oC VGS = 5.5V ID, DRAIN CURRENT (A) 101 6 100 OPERATION IN THIS AREA MAY BE LIMITED BY rDS(ON) 100s 1ms 10ms 100ms DC 4 VGS = 5.0V VGS = 4.5V 2 VGS = 4.0V 0 0 20 40 60 VDS, DRAIN TO SOURCE VOLTAGE (V) 80 10-1 10-2 100 101 102 VDS, DRAIN TO SOURCE VOLTAGE (V) 103 FIGURE 4. FORWARD BIAS SAFE OPERATING AREA FIGURE 5. OUTPUT CHARACTERISTICS 3 BUZ76 Typical Performance Curves 6 ID, ON-STATE DRAIN CURRENT (A) 5 4 3 2 1 0 0 rDS(ON), ON-STATE RESISTANCE () PULSE DURATION = 80s VDS = 25V TJ = 25oC Unless Otherwise Specified (Continued) 6 VGS = 5V 5.5V 4 2 6V 6.5V 7V 7.5V 8V 9V 10V 20V 6 8 PULSE DURATION = 80s 0 5 VGS, GATE TO SOURCE VOLTAGE (V) 10 0 2 4 ID, DRAIN CURRENT (A) FIGURE 6. TRANSFER CHARACTERISTICS FIGURE 7. DRAIN TO SOURCE ON RESISTANCE vs GATE VOLTAGE AND DRAIN CURRENT rDS(ON), DRAIN TO SOURCE ON RESISTANCE () PULSE DURATION = 80s ID = 1.5A VGS = 10V VGS(TH), GATE THRESHOLD VOLTAGE (V) 4 4 VDS = VGS, ID = 1mA 3 3 2 2 1 1 0 -50 0 50 100 150 0 -50 0 50 100 150 TJ, JUNCTION TEMPERATURE (oC) TJ, JUNCTION TEMPERATURE (oC) FIGURE 8. DRAIN TO SOURCE ON RESISTANCE vs JUNCTION TEMPERATURE FIGURE 9. GATE THRESHOLD VOLTAGE vs JUNCTION TEMPERATURE 101 5 gfs, TRANSCONDUCTANCE (S) VGS = 0, f = 1MHz CISS = CGS + CGD CRSS = CGD COSS = CDS + CGS 4 PULSE DURATION = 80s VDS = 25V TJ = 25oC C, CAPACITANCE (nF) 100 CISS 10-1 COSS CRSS 10-2 3 2 1 0 10 20 30 VDS, DRAIN TO SOURCE VOLTAGE (V) 40 0 0 1 2 3 ID, DRAIN CURRENT (A) 4 5 FIGURE 10. CAPACITANCE vs DRAIN TO SOURCE VOLTAGE FIGURE 11. TRANSCONDUCTANCE vs DRAIN CURRENT 4 BUZ76 Typical Performance Curves 102 ISD, SOURCE TO DRAIN CURRENT (A) PULSE DURATION = 80s VGS, GATE TO SOURCE VOLTAGE (V) Unless Otherwise Specified (Continued) 15 ID = 4.5A 101 10 VDS = 80V VDS = 320V 5 100 TJ = 150oC TJ = 25oC 10-1 0 0.5 1.0 1.5 VSD, SOURCE TO DRAIN VOLTAGE (V) 2.0 0 0 5 10 15 20 25 Qg(TOT), TOTAL GATE CHARGE (nC) FIGURE 12. SOURCE TO DRAIN DIODE VOLTAGE FIGURE 13. GATE TO SOURCE VOLTAGE vs GATE CHARGE Test Circuits and Waveforms tON td(ON) tr RL VDS + tOFF td(OFF) tf 90% 90% RG DUT - VDD 0 10% 90% 10% VGS VGS 0 10% 50% PULSE WIDTH 50% FIGURE 14. SWITCHING TIME TEST CIRCUIT VDS (ISOLATED SUPPLY) FIGURE 15. RESISTIVE SWITCHING WAVEFORMS CURRENT REGULATOR VDD SAME TYPE AS DUT Qg(TOT) Qgd Qgs D VDS VGS 12V BATTERY 0.2F 50k 0.3F G DUT 0 Ig(REF) 0 IG CURRENT SAMPLING RESISTOR S VDS ID CURRENT SAMPLING RESISTOR Ig(REF) 0 FIGURE 16. GATE CHARGE TEST CIRCUIT FIGURE 17. GATE CHARGE WAVEFORMS 5 |
Price & Availability of BUZ76
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |